Bursts in the HETE-2 catalogue

We have studied a set of GRBs detected by HETE-2 satellite with special focus on low-energy part of the spectrum. Results of data reduction procedures of different members of the HETE collaboration were combined with other publicly available information creating a concise catalogue. A more detailed analysis of lightcurves of the prompt emission was performed using data from FREGATE instrument.     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状，阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景；对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结，并在此基础上对发动机主要组件的技术方案及其特点开展分析；对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析；对50t级氢氧火箭发动机的研制情况、技术特点进行了总结，并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

原位自生TiB2/Al复合材料车削参数多目标优化方法

原位自生TiB2/Al复合材料具有密度小、比强度高、高耐磨等特点,在航空航天领域具有广泛的应用前景.主要针对TiB2/Al复合材料车削参数对表面粗糙度的影响进行探索性研究.首先,以车削速度、进给速度、车削深度为对象,基于单因素试验研究了车削参数控制域.进一步在控制域内设计正交试验,并基于试验结果研究了表面粗糙度与车削参数的映射关系,推导了材料去除率模型.最后,以表面粗糙度和材料去除率为优化目标,提出并研究了基于GA-Pareto的车削参数多目标优化方法,并通过试验验证了该方法的可行性和有效性.     

热处理对激光增材制造Ti2AlNb基合金组织及性能的影响

利用激光增材制造技术制备出Ti-22Al-25Nb合金薄壁试样,分析了沉积态和热处理态试样的宏观形貌、相组成和显微组织,以及不同制度热处理态试样的组织和室温拉伸性能.结果表明,沉积态试样相组成沿沉积高度方向呈现由B2+O+α2→B2+O→B2的变化趋势;热处理态试样的微观组织和相组成均匀,由B2、O、α23相组成;经930℃保温2h空冷的固溶处理和800℃保温24h空冷的时效处理后,合金室温拉伸性能好,抗拉强度为1017MPa,断后伸长率为6.0％.     

基于FPGA的DDR2缓存控制器在 无线链路图像跟踪系统中的应用

图像跟踪系统是机载光电吊舱的重要组成部分,其对目标捕捉的成功率直接决定了机载光电吊舱的性能.而作用于机载光电吊舱与地面站之间的无线链路系统,有着不可消除的的延时特性,这极大地降低了目标捕捉成功率.本文设计了一种基于FPGA的DDR2缓存控制器,通过缓存控制器可以轻松实现高清视频图像的快速存储和调用,从而实现图像跟踪算法对无线链路延时的补偿.该缓存控制器成功应用于某型机载光电吊舱图像跟踪系统,有效消除了无线链路延时的影响,提高了图像跟踪系统对目标捕捉的成功率.     

40CrNi2Si2MoVA钢喷丸强化层微观结构

喷丸强化在金属材料表面形成强化层,可以有效提高构件的疲劳寿命,是金属构件表面完整性制造的重要方法.喷丸强化已有效应用于40CrNi2Si2MoVA钢制构件,为了探明喷丸强化对该钢种的强化机理,本工作采用高分辨电子显微电镜(HREM)对40CrNi2Si2MoVA钢喷丸强化层微观组织结构进行了系统分析研究.结果表明:喷丸强化使40CrNi2Si2 MoVA钢组织细化,呈明显的马氏体“有效晶粒”现象,“有效晶粒”尺寸为几个纳米到几十个纳米;“有效晶粒”界面呈明显的倾转现象,相邻“有效晶粒”间转动角度为几度到几十度,最大达到30°.     

2219铝合金搅拌摩擦焊缝Al2Cu相聚集行为特征分析

对2219C10S状态铝合金进行搅拌摩擦焊接试验,发现焊缝中存在聚集物的异常聚集现象,聚集相在X光检测中显示为亮白色聚集物,主要形态分为团块状、线状和指状三种,聚集相处焊缝的力学性能与无聚集相焊缝的力学性能基本相同。各形态聚集相的分布位置受搅拌头焊接影响区域的不同而不同,团块状聚集相主要存在于焊核中心或偏焊缝上表面位置处,线状和指状聚集相主要存在于焊核中心或偏焊缝根部位置处。对异常聚集相进行能谱分析知,聚集相主要组成元素为Al和Cu,原子百分比近似为2∶1,确定聚集相主要成分为Al2Cu。对聚集相的成因进行分析认为,聚集相的产生主要受搅拌摩擦焊接热输入及搅拌头机械搅拌作用的影响,在焊接过程中,塑态软化金属中的Al2Cu在填补搅拌针后方空腔的过程中出现了聚集行为,随着塑态金属的凝固,聚集行为开始变得缓慢并结束。